Trifolen® M-plus
Aim of trifolen M-plus is maximum gas proofness and saving material at the same time.
Independently measured data support our high quality standards.
- independently measured data for tensile strength and gas proofness
|
Trifolen®-M-plus |
Minimum standard
DLG for 200 µ |
tensile strength
longitudinal
across |
DIN ISO 527
25 N/mm²
25 N/mm² |
17 N/mm²
17 N/mm² |
ultimate elongation at rupture
longitudinal
across |
DIN 53455-8-5
500 %
650 % |
400 %
400 % |
puncture weight
film
fold |
AMST D 1709
500 g
500 g |
No DLG standards required |
|
oxygen permeability
|
DIN 53380 (0,2 bar 23°C)
180 cm³/m²/day |
250 cm³/m² |
All data independently measured by SKZ Würzburg 2006
Differences in colour are possible.
Conclusion: - Trifolen®-M-plus is considerably more gas proof than the minimum standards of DLG for 200µm require.
to product information sheet Trifolen®-M-plus >>
- available in many different sizes (even in-between sizes or on big jumbo rolls)
size-index of Trifolen® M-plus >>
<< back to silage film
|
